Step-N-Lock, 8" x 36" White Vertical Panel DG Lime/Yellow 2-Sides, 28 lb Base, Stop Sign (Red) For Pedestrians, (Pedestrian in Crosswalk)
- 12" x 36" Vertical Panel Plastic Barricade and Recycled Rubber Base
- "Step-N-Lock" the Vertical Panel into the 28 lb Base
- Panel Separates from Base when Impacted by Vehicle
- Stop for Pedestrians with Super High Intensity Reflective Sheeting on Both Sides
- Cut outs on Panel and Base for Easy Set Up and Movement
Step-n-Lock® 33000/34000 Series
TrafFix Step-n-Lock Vertical Panel Barricade consist of durable blow molded polyethylene panel and recycled rubber base. To assemble, simply "Step-n-Lock" the vertical panel into the base. No heavy rings or bases that must be lifted over the top of the panel. For transportation and storage, both the panels and bases can be easily separated and stacked.
The panel separates from the base when impacted by a vehicle. The panel face is recessed to minimize abrasions and scratches to the expensive reflective sheeting. If severely damaged, the reflective sheeting can be replaced.
Six locking buttons are molded into the panel and correspond to six matching recesses molded in the base. Simply step down on the foot hole to lock the panel in place. The Step-n-Lock design ensures the panel will remain vertically locked in place and "square to traffic." Panel sizes, messages and legends can be intermixed with either the 28 or 43 lb. base.
Vertical Panel Rubber Base
Made from 100% recycled rubber, the base incorporates two easy-grip carrying handles, a vulcanized rubber center section that provides reinforcement from wear and tear due to panel separation. On the under side of the base, there are four raised anti-rotational foot pads to minimize movement from wind, or turbulence from passing vehicles.
|Material||High Density Polyethylene, Recycled Rubber|